MSCom
Neuer Benutzer
Threadstarter
- Dabei seit
- 20.09.2016
- Beiträge
- 1
Hallo,
es ist mir leider nicht möglich Nachrichten an bestimmte Adressen zu senden (obwohl ich von den Absendern E-Mails erhielt). Ich bekomme Informationen wie:
Kann mir bitte jemand sagen was ich tun könnte damit ich wieder Nachrichten an die Leute senden darf?
Beste Grüße,
Christian
es ist mir leider nicht möglich Nachrichten an bestimmte Adressen zu senden (obwohl ich von den Absendern E-Mails erhielt). Ich bekomme Informationen wie:
Your message did not reach some or all of the intended recipients.
Subject: RE: Test
Sent: 01.07.2020 09:09
The following recipient(s) cannot be reached:
'XYZ' on 01.07.2020 09:10
This message could not be sent. You do not have the permission to send the message on behalf of the specified user.
__________________________________________________
Diagnostic information for administrators:
__________________________________________________
Error is [0x80070005-0x000004dc-0x00000524].
Exchange response headers:
request-id: 3eba9306-1f63-47c1-922b-cecf3bee3783
X-ServerApplication: Exchange/15.20.3153.018
X-FEServer: AM7PR02CA0030
X-BEServer: AM0PR07MB4817
X-CalculatedBETarget: AM0PR07MB4817.eurprd07.prod.outlook.com
X-RequestId: {B3DAFF34-E08D-45BA-92DA-AF0889FBE82A}:62
X-ClientInfo: {EBAFA8F0-4D0B-4BF3-8FEC-D415771ECA15}:198320014
X-ElapsedTime: 1404
X-BackEndHttpStatus: 200
X-ResponseCode: 0
X-DiagInfo: AM0PR07MB4817
X-RequestType: Execute
__________________________________________________
ROPs Summary:
0: ropSetProps (10) Processed(1) Completed(0)
ROP result: 0
Response codes: 0
1: ropSetProps (10) Processed(1) Completed(0)
ROP result: 0
Response codes: 0
2: ropSetProps (10) Processed(1) Completed(0)
ROP result: 0
Response codes: 0
3: ropFlushRecipients (14) Processed(1) Completed(0)
ROP result: 0
Response codes: 0
4: ropSetProps (10) Processed(1) Completed(0)
ROP result: 0
Response codes: 0
5: ropTransportSend (74) Processed(1) Completed(0)
ROP result: 0
Response codes: 1244
__________________________________________________
Response Exceptions:
ROP Index: 5
ROP Associated: ropTransportSend (74)
Microsoft.Exchange.Data.Storage.SendAsDeniedException: Can't transport send message. ---> Microsoft.Mapi.MapiExceptionSendAsDenied: MapiExceptionSendAsDenied: Unable to transport send message. (hr=0x80070005, ec=1244)
Diagnostic context:
Lid: 35250
Lid: 36674 dwParam: 0xA
Lid: 61250 dwParam: 0x0
Lid: 45378 dwParam: 0x2
Lid: 44866 dwParam: 0x562
Lid: 36674 dwParam: 0xE
Lid: 61250 dwParam: 0x0
Lid: 45378 dwParam: 0x567
Lid: 44866 dwParam: 0x198
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=1281]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=148][latency=0]
Lid: 52176 ClientVersion: 15.20.3153.18
Lid: 50032 ServerVersion: 15.20.3153.6018
Lid: 35180
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 27962 ROP: ropFlushRecipients [14]
Lid: 31418 --- ROP Parse Done ---
Lid: 35250
Lid: 36674 dwParam: 0xA
Lid: 61250 dwParam: 0x0
Lid: 45378 dwParam: 0x2
Lid: 44866 dwParam: 0x2E
Lid: 36674 dwParam: 0x4A
Lid: 61250 dwParam: 0x0
Lid: 45378 dwParam: 0x33
Lid: 44866 dwParam: 0x0
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=148]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=464][latency=1]
Lid: 52176 ClientVersion: 15.20.3153.18
Lid: 50032 ServerVersion: 15.20.3153.6018
Lid: 35180
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropSetProps [10]
Lid: 27962 ROP: ropTransportSend [74]
Lid: 17082 ROP Error: 0x4DC
Lid: 44949
Lid: 21921 StoreEc: 0x4DC
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 38698
Lid: 37692
Lid: 37948
Lid: 33852 dwParam: 0x0 Msg: SMTP
Lid: 56248 StoreEc: 0x4DC
Lid: 40748 qdwParam: 0xB01000000000001
Lid: 57132 qdwParam: 0x0
Lid: 63016 dwParam: 0x4A
Lid: 39640 StoreEc: 0x4DC
Lid: 45434 Guid: 00030000-b0c5-6439-0000-000000000000
Lid: 10786 dwParam: 0x0 Msg: 15.20.3153.018:AM0PR07MB4817:b2270cd9-dcc5-4744-9998-aef3ab0558b2
Lid: 51330 qdwParam: 0x8D81D8DB40BE02A
Lid: 39570
Lid: 55954 dwParam: 0xA
Lid: 49266
Lid: 33010 dwParam: 0xA
Lid: 54258 Error: 0x0
Lid: 40002
Lid: 56562 dwParam: 0x0
Lid: 64146 dwParam: 0x4A
Lid: 33010 dwParam: 0x4A
Lid: 54258 Error: 0x4DC
Lid: 1750 ---- Remote Context End ----
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0x4DC
Lid: 34722
Lid: 51106 StoreEc: 0x4DC
Lid: 41890
Lid: 58274 StoreEc: 0x4DC
Lid: 59285
Lid: 46997 StoreEc: 0x4DC
at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException, MapiStore mapiStore)
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException, MapiStore mapiStore)
at Microsoft.Mapi.MapiBase.ThrowIfError(String message, Int32 hr)
at Microsoft.Mapi.MapiMessage.TransportSendMessage(PropValue[]& propsToReturn)
at Microsoft.Exchange.Data.Storage.MapiAccessor.TransportSendMessage(Object mapiObject, ExTimeZone timezone, PropValue[]& mapiPropValues)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.MapiAccessor.TransportSendMessage(Object mapiObject, ExTimeZone timezone, PropValue[]& mapiPropValues)
at Microsoft.Exchange.Data.Storage.CoreItem.TransportSend(PropertyDefinition[]& properties, Object[]& values)
at Microsoft.Exchange.Data.Storage.Items.ControlFlowCoreItemDecorator.TransportSend(PropertyDefinition[]& properties, Object[]& values)
at Microsoft.Exchange.RpcClientAccess.Handler.Message.TransportSend()
at Microsoft.Exchange.RpcClientAccess.Handler.RopHandler.<>c_
Transport-Send failed: failure enum(25), HResult(0x00000000), EC(1244).
Transport-Send failed: failure enum(22), HResult(0x00000000), EC(1244).
Submit-Message failed: message id(3), failure enum(13), HResult(0x80070005), EC(1244).
Kann mir bitte jemand sagen was ich tun könnte damit ich wieder Nachrichten an die Leute senden darf?
Beste Grüße,
Christian